Samsung CLX-9250ND Installation Guide - Page 45
Device name, Location, Administrator, Connected
View all Samsung CLX-9250ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3. Press the Device name input area. The pop-up keyboard appears. Remove the existing device name and enter the device name you want to use and then press OK. Then press Next. Keep in mind to enter the device name to be used on the network. • If necessary, enter the location of the machine in the Location input area. • If necessary, enter the information in the Administrator input area for the person to contact when any problem occurs on the machine. 4. Press the Test button to verify the LAN connection. When Connected appears after pressing Test, press Next. If N/A appears, make sure that the machine is connected to the network then verify the LAN connection again. • If a network connection problem persists, contact your network administrator. • If you installed an optional fax kit or finisher, press each Test button for verify connection of them. Initial settings and testing of the machine_ 44