Samsung DVD-V4600 User Manual (user Manual) (ver.1.0) (English) - Page 18

DTS Dynamic Compression If your A/V receiver is equipped with a DTS decoder, your DVD-VCR can output DTS digital sound, but you MUST enable this feature in the menu system. NOTE: Select "On" ONLY if you have connected a DTS-equipped A/V receiver to the Digital audio Out (coaxial) on the DVD-VCR rear panel. 1 Open "MENU" Press the MENU button while the DVD is in Stop mode. 2 Select "DVD" Use the UP/DOWN buttons to highlight "DVD" then press the ENTER button. 3 Select "Audio" Highlight "Audio", then press the ENTER button. Dynamic Compression restrains the dynamic range of sounds, i.e. the difference between the loud and quiet passages of a DVD audio track. 1 Open "MENU" Press the MENU button while the DVD is in Stop mode. 2 Select "DVD" Use the UP/DOWN buttons to highlight "DVD" then press the ENTER button. 3 Select "Audio" Highlight "Audio", then press the ENTER button. 4 Set "DTS" Highlight "DTS" then press the RIGHT button to select one of the following options: • Off - To use your DVD/TV with an A/V receiver NOT equipped with a DTS decoder. • On - To use your DVD/TV with an A/V receiver equipped with a DTS decoder Off On PCM Down Sampling : On 4 Set "Dynamic Compression" Highlight "Dynamic Compression", then press the RIGHT button to select one of the following options: • On - This will compress the total dynamic range of the DVD audio, making quiet passages in the audio signal louder and loud passages softer. • Off - This will preserve the original dynamic range. On On On PCM Down Sampling : Onff Off ENG-17