Samsung LN-S1952W Quick Guide (easy Manual) (ver.1.0) (English) - Page 15

Storing Channels Automatically Air/Cable Auto Program Add/Delete Fine Tune : Air Move Enter Channel Return The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. 1. To select the signal source, follow the "Selecting the Video Signal-source" instructions numbers 1 to 3 on page 12. 2. Press the or button to select "Auto Program", then press the ENTER button. 3. Press the ENTER button to select "Start". The channel search will start and end automatically. Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu. 4. After all the available channels are stored, the "Channel" menu reappears. 5. Press the EXIT button to exit. Press the AUTO PROG. button on the remote control. Storing Channels Manually Air/Cable Auto Program Add/Delete Fine Tune : Air Move Add/Delete Air Ch. Air Air Air Air Air Air Air Air Air Air Air Air Air Air Air Add Page Move Enter 8 1/5 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Return Enter Channel Return Set the channels according to your preference. You can easily delete or add the channels you want. 1. Use the number buttons to directly select the channel that will be added or deleted. 2. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. 3. Press the or button to select "Add/Delete", then press the ENTER button. 4. Press the or button to select the channels to be deleted or added. 5. Press the button to select " " column, then press the ENTER The channels marked with " " will be added. 6. Press the EXIT button to exit. button. You can directly select any channel (including an erased channel) by using the number buttons on the remote control. Use the number buttons to directly select the channel that will be added or erased. Press the ADD/DEL button on the remote control. Fine Tuning Channels Air/Cable Auto Program Add/Delete Fine Tune : Air Move Enter Channel Return Use fine tuning to manually adjust a particular channel for optimal reception. 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. 3. Press the or button to select "Fine Tune", then press the ENTER button. 4. Press the or button to adjust the fine tuning. 5. To store the fine tuning setting in the TV's memory, press the ENTER button. 6. Press the EXIT button to exit. If you do not store the fine-tuned channel in memory, adjustments are not saved. Fine tuned channels that have been saved are marked with an asterisk " * " on the right-hand side of the channel number in the channel banner. To reset the fine-tuning, select "Reset" by pressing the or button and then press the ENTER button. English-13