Samsung NP-Q1 Quick Guide (easy Manual) (ver.1.0) (English) - Page 141
Joystick, Enter, Setup Notice, enter System Setup.
View all Samsung NP-Q1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
3 On the screen, the password setting buttons are described. You can set a password by entering numbers between 1 and 4 with the Joystick. Since the u2 button is used as Delete (BackSpace) and the u4 button is used as Cancel (Esc), enter the password using the Joystick. Up: 1 4 When a message confirming the password configuration appears in the [Setup Notice] window, press . The supervisor password has been set. The supervisor password is required to turn the computer on or to enter System Setup. Left: 4 Right: 2 Next: 3 Enter a password, press , reenter the password for confirmation, and press again. 141
141
3
On the screen, the password setting
buttons are described.
You can set a password by entering
numbers between 1 and 4 with the
Joystick
.
Since the
u2
button is used as Delete
(BackSpace) and the
u4
button is
used as Cancel (Esc), enter the pass-
word using the
Joystick
.
Left: 4
Right: 2
Next: 3
Up: 1
Enter a password, press <
Enter
>, re-
enter the password for confirmation,
and press <
Enter
> again.
4
When a message confirming the
password configuration appears in
the [
Setup Notice
] window, press
<
Enter
>.
The supervisor password has been
set. The supervisor password is re-
quired to turn the computer on or to
enter System Setup.