Samsung SC DX103 User Manual (ENGLISH) - Page 94

连接至, 设备

Page 94 highlights

connecting to AV devices 连接至 AV 设备 DUBBING IMAGES ON A VCR OR DVD/HDD RECORDER You can dub images played back on this DVD camcorder onto other video devices, DVD camcorder such as VCRs or DVD/HDD recorders. Use the provided AV cable to connect the DVD camcorder to another video device as ���� shown in the following figure: 1. Slide the POWER switch downwards to turn the power on, then open the LCD screen. page 21 • Set the appropriate storage media. (SC-DX103/DX105 only) page 30 2. Press the MODE button to set the Play mode. 3. Use the Joystick to select the recorded (dubbed) image in the thumbnail index view, then press the Joystick. 4. Press the record button on the connected device. • The DVD camcorder will start playback and the recording device will dub it. • Refer to "Editing chapter" to create a playlist by selecting desired scenes from those recorded on this DVD camcorder. pages 40~46 • Audio is heard from the speaker. If the volume is too high, noise may enter the dubbed image. • Be sure to use the AC power adaptor to power the DVD camcorder to prevent battery power from shutting off during recording on another video device. 通过 VCR 或 DVD/HDD VCRs or DVD/HDD recorders DVD VCR 或 DVD/HDD AV 电缆将 DVD Signal flow AV cable 1 POWER LCD 21 SCDX103/DX105)。 第 30 页 2. 按下 MODE 3 4 DVD DVD 40~46 页 DVD 88_ English 中文 _88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

88
_ English
中文
_
88
DUBBING IMAGES ON A VCR OR DVD/HDD
RECORDER
You can dub images played back on this
DVD camcorder onto other video devices,
such as VCRs or DVD/HDD recorders.
Use the provided AV cable to connect the
DVD camcorder to another video device as
shown in the following figure:
1.
Slide the
POWER
switch downwards to
turn the power on, then open the LCD
screen.
page 21
Set the appropriate storage media.
(SC-DX103/DX105 only)
page 30
2.
Press the
MODE
button to set the Play
mode.
3.
Use the
Joystick
to select the recorded (dubbed) image in
the thumbnail index view, then press the
Joystick
.
4.
Press the record button on the connected device.
The DVD camcorder will start playback and the recording
device will dub it.
Refer to “Editing chapter” to create a playlist by selecting
desired scenes from those recorded on this DVD camcorder.
pages 40~46
Audio is heard from the speaker. If the volume is too high,
noise may enter the dubbed image.
Be sure to use the AC power adaptor to power the DVD
camcorder to prevent battery power from shutting off during
recording on another video device.
connecting to AV devices
通过
VCR
DVD
/
HDD
刻录机进行复制
您可以将在本
DVD
摄像机上播放的图像通
VCR
DVD
/
HDD
刻录机进行复制。
使用
AV
电缆将
DVD
摄像机连接到另外的
视频设备上,如下图所示:
1.
向下滑动
POWER
电源开关开启摄像机
然后打开
LCD
显示屏。
21
切换到适当的存储介质
(
仅限
SC
-
DX103
/
DX105)
30
2.
按下
MODE
按钮切换到播放模式。
3.
使用
操纵杆
选择索引画面上想要进行录
制(复制)的影音文件,然后按下
操纵杆
确认。
4.
按下连接设备上的录制按钮。
DVD
摄像机将开始播放,并且录制
设备将对播放的图像进行复制。
请参见“编辑章节”,将本
DVD
摄像机录制的影音选择一
些喜爱的场景创建一个播放列表。
40~46
可以从扬声器听到声音。如果音量调节得太大,噪音也许
会进入复制的图像。
请务必使用交流电源适配器从家用交流电源插座为
DVD
像机提供电源,以防在其他视频设备上录制时出现电池电
源关闭现象。
连接至
AV
设备
VCRs or DVD/HDD recorders
Signal flow
AV cable
DVD camcorder