Samsung SCX-3200 User Guide - Page 41

Easy Install is recommended for most users. All components necessary for machine operations will be installed. If you select Custom Install, you can choose individual operations will be installed. 12. Select the Wireless Setting and Installation option. 13. The software searches the wireless network. If the searching has failed, you may check if the USB cable is connected between the computer and machine properly, and follow the instruction on the window. 14. After searching, the window shows the wireless network devices. Select the name (SSID) of access point you are using and click Next. When you set the wireless configuration manually, click Advanced Setting. • Enter the wireless Network Name: Type the SSID of access point you want (SSID is case-sensitive). • Operation Mode: Select Infrastructure. • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase) which is manually configured on the access point and each of its clients. • Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP AES) • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using the WEP Encryption, select the appropriate WEP Key Index. The wireless network security window does appear when the access point has security setting. The wireless network security window appears. The window may differ according to its security mode, WEP or WPA. • In case of WEP Select Open System or Shared Key for the authentication and enter WEP security key. Click Next. WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. • In case of WPA Enter the WPA shared key and click Next. WPA authorizes and identifies users based on a secret key that changes automatically at regular intervals. WPA also uses TKIP (Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard) for data encryption. 15. The window shows the wireless network setting and check if settings are right. Click Next. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the window. However, if it shows Static, click Change TCP/IP to change the assignment method to DHCP. • For the Static method If the IP address assignment method is Static, check if Static is shown in the window. However, if it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. Before entering the IP address for the machine, you must know the computer's network configuration information. If the computer is set to DHCP, you must contact the network administrator to get the static IP address. Example) If computer's network information is as below: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Machine's network information should be as below: - IP address: 169.254.133. 43 (Use computer's IP address, with changed last three digits.) - Subnet Mask: 255.255.0.0 (Use the computer's subnet mask.) - Gateway: 169.254.133.1 (Change the last three digits from IP address of your machine to 1.) 16. The wireless network is connecting according to the network configuration. 17. When the wireless network setting is completed, disconnect the USB cable between the computer and machine. 18. After the installation is finished, click Restart. Installing the machine on an Ad-Hoc wireless network (Macintosh) If you do not have a access point (AP), you may still connect the machine wirelessly to your computer by setting up an Ad-Hoc wireless network by following these simple directions. Items to prepare Ensure you have next items ready. • Wireless network-connected computer • Software CD that provided with your machine • The machine installed with a wireless network interface • USB cable Creating the Ad-Hoc network in Macintosh When the items are ready, follow below steps: 1. Check whether the USB cable is connected to the machine. 2. Turn on your computer and machine. 3. Insert the supplied software CD into your CD-ROM drive. 4. Double-click the CD-ROM icon that appears on your Macintosh desktop. 5. Double-click the MAC_Installer folder. 6. Double-click the Installer OS X icon. 7. Enter the password and click OK. 8. The Samsung Installer window opens. Click Continue. 9. Read the license agreement and click Continue. 10. Click Agree to agree to the license agreement. 11. Select Easy Install and click Install. Easy Install is recommended for most users. All components necessary for machine operations will be installed. If you select Custom Install, you can choose individual operations will be Wireless network setup (SCX-3205W(K))_ 41