Samsung SCX-3200 User Guide - Page 77

Troubleshooting, Redistributing toner - red light error

Get Samsung SCX-3200 PDF manuals and user guides View all Samsung SCX-3200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 77 highlights

troubleshooting 12. This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Redistributing toner • Tips for avoiding paper jams • Clearing paper jams • Solving other problems REDISTRIBUTING TONER When the toner cartridge is near the end of its life: • White streaks or light printing occurs. • The Status LED blinks red. If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. 1. Open the scan unit. 3. Pull the toner cartridge out. 4. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. 2. Open the inner cover. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. Do not touch the drum in the toner cartridge or imaging unit. Use the handle on the cartridge to avoid touching this area. 5. Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the machine. The tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into the correct position until it locks Troubleshooting_ 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Troubleshooting
_ 77
12.
troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
This chapter includes:
•
Redistributing toner
•
Tips for avoiding paper jams
•
Clearing paper jams
•
Solving other problems
REDISTRIBUTING TONER
When the toner cartridge is near the end of its life:
•
White streaks or light printing occurs.
•
The
Status LED
blinks red.
If this happens, you can temporarily improve print quality by redistributing
the remaining toner in the cartridge. In some cases, white streaks or light
printing will still occur even after you have redistributed the toner.
1.
Open the scan unit.
2.
Open the inner cover.
3.
Pull the toner cartridge out.
4.
Thoroughly roll the cartridge five or six times to distribute the toner
evenly inside the cartridge.
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
Do not touch the drum in the toner cartridge or imaging unit. Use
the handle on the cartridge to avoid touching this area.
5.
Hold the toner cartridge by the handle and slowly insert the cartridge into
the opening in the machine.
The tabs on the sides of the cartridge and corresponding grooves within
the machine will guide the cartridge into the correct position until it locks