Samsung SF-5100PI User Manual (user Manual) (ver.1.00) (English) - Page 82
Maintenance
View all Samsung SF-5100PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
08-Maintenance 12/10/99 5:32 AM Page 1 Maintenance Cleaning the OPC drum If you are getting streaks or spots on your print, you may clean the OPC drum. 1. Make sure that the paper is loaded. 2. Press Setup on the control panel. The display shows the first setup menu; FAX NUMBER/NAME. 3. Press ➛ or ❿ until 'MAINTENANCE' appears, then press Start/Enter. 4. Press ➛ or ❿ until you find 'CLEAN DRUM', then press Start/Enter. The machine automatically pulls in a sheet of paper, and prints it out. The toner particles on the OPC drum surface are fixed to the paper. 5. Press Stop to return to standby mode. Troubleshooting 6.9
Maintenance
Cleaning the OPC drum
If you are getting streaks or spots on your print, you may clean the OPC
drum.
1. Make sure that the paper is loaded.
2. Press
Setup
on the control panel.
The display shows the first setup menu; FAX NUMBER/NAME.
3. Press
➛
or
❿
until ‘MAINTENANCE’ appears, then press
Start/Enter
.
4. Press
➛
or
❿
until you find ‘CLEAN DRUM’, then press
Start/Enter
.
The machine automatically pulls in a sheet of paper, and prints it out.
The toner particles on the OPC drum surface are fixed to the paper.
5. Press
Stop
to return to standby mode.
6.
9
Troubleshooting
08-Maintenance
12/10/99 5:32 AM
Page 1