Samsung SRN-3250 User Manual - Page 82
Initializing Settings
View all Samsung SRN-3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
When pressing Enter, the following messages appear while the firmware is being updated. Once the update process is complete, the system automatically reboots itself. To move back to a previous phase, press ESC. To cancel the update and move back to the main screen, hold down ESC for 2 seconds or longer. System Update is in Progress... System will reboot after 5 seconds Rebooting system is in Progress... If a USB flash drive is not inserted into the product back panel USB terminal, the following error message appears. There's no usb stick Check usb please... If a USB flash drive is inserted, but does not contain a firmware update file, the following error message appears. No f/w file in usb Check usb please... 5.1.5. Initializing Settings Under System, select 5. Factory Reset, and then press ENTER. A message appears on the display prompting you to confirm that you wish to reset all configurations to their defaults. Warning! All actions Will be stopped Are you sure? Yes: Enter No: Esc Upon pressing Enter, the following messages appear while settings are being initialized. When initialized, the system reverts to the factory default settings. To move back to a previous phase, press ESC. To cancel the initialization and move back to the main screen, hold down ESC for 2 seconds or longer. Factory reset is in Progress... System will reboot after 5 seconds 80