Samsung SRN-3250 User Manual - Page 93
Removing HDDs
View all Samsung SRN-3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
5.4. Removing HDDs On the main screen, press ∧ and ∨ to move to the following screen, and then press Enter. 4. Remove HDD [SET] The screen shown below appears where you can use ∧ and ∨ to select the HDD to remove. HDD Number to remove Internal HDD? [1] HDD Number to remove External Bay? [1] Select the number for an internal HDD or an external HDD bay, and then press Enter. Upon pressing Enter, the following messages appear while the selected HDD is being removed. Executing... Please Wait!!! Remove Int HDD[1] [DONE] Remove Ext Bay[1] [DONE] Once the [Done] message appears, you may physically remove the HDD from the product. When selecting an HDD that is not available or connected, the following message appears. Internal HDD[1] is empty!! External Bay[1] is not connected!! Check HDD to Remove Please Try Again Note The number for an internal HDD or external HDD bay is determined depending on which product port that you connect to. Available numbers are 1, 2, 3, and 4 from the upper left and right to the bottom left and right. Please Refer to "Chapter 2. Part Names" 91