Samsung SRN-3250 User Manual - Page 86
DHCP Client Setup
View all Samsung SRN-3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Press the ∧, ∨ buttons to select numbers (0~9), space, and period (.); press the <, > buttons to move between digits. Once you have finished entering the IP address, press Enter. Subnet Mask 0.0.0.0 Gateway 0.0.0.0 DNS1 Server IP 192.168.1.1 Enter the Subnet Mask, Gateway, and DNS Server 1 address the same way. Confirm IP Setup? Yes: Enter No: Esc Pressing Enter moves to the next screen, as the IP address for Monitor Ethernet Port is being saved. To move back to the previous phase, press ESC. To cancel the new settings and move back to the main screen, hold down ESC for 2 seconds or longer. IP Setup [DONE] Note The DNS1 address can be set under Monitor Ethernet Port Port > Static IP. The DNS 2 address is under Source Port > Static IP. Once set, these DNS servers are used by all ports. DNS1 is used as the default, and DNS2 is the backup. DHCP Client Setup Press ∧ and ∨ to select 2. Use DHCP (Client), and then press Enter. Use DHCP Client? Yes: Enter No: Esc Pressing Enter moves to the next screen, as Monitor Ethernet Port is updated to use DHCP. To move back to the previous phase, press ESC. To cancel the new settings and move back to the main screen, hold down ESC for 2 seconds or longer. Client Mode Setup [DONE] 84