Sanyo PDG-DWL100 RS232C Expand - Page 16

PDG-DWL100 Expand Serial Command Functional Specifications 8.4.5 CF_GAMMA Command Command "CF_GAMMA_%1" [CR] "000~003 Directly specify setting value of Gamma %1 "UP Increment setting value of Gamma by 1 "DN Decrement setting value of Gamma by 1 Details Set user controlled value of Gamma. (Available only in the normal Power ON status) No display is shown when projector received command Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.4.6 CF_COLTEMP Command Command "CF_COLTEMP_%1" [CR] "000" - "002" %1 "UP Change the Color Temp upward "DN Change the Color Temp downward Details Set Color Temperature (Available only in the normal Power ON status) No display is shown when projector received command. Acceptable Correspondence Unacceptable "000" [CR] "Error Code" [CR] 8.4.7 CF_IMAGE Command Command "CF_IMAGE__%1" [CR] "PRESEN Presentation (Fixed value to display graphic image with Presentation) %1 "BRIGHT" -------- Bright (Fixed value to focus on tone reproduction for Bright) "MOVIE ------ Movie (Fixed value to focus on tone reproduction for Movie) "SRGB" ------ sRGB (Fixed value to focus on tone reproduction for sRGB) "USER" ------ USER (Fixed value to focus on tone reproduction for USER) Details Select Image mode. (Available only in the normal Power ON status) The projector shows Image OSD at receiving the command. Acceptable Correspondence Unacceptable "000" [CR] "Error Code" [CR] 8.4.8 CF_BCOLOR Command Command "CF_BCOLOR_%1"[CR] "ON~OFF"------ Directly specify setting value of Brilliant Color. %1 "UP"---- Change the Brilliant Color upward "DN"---- Change the Brilliant Color downward Details Set user controlled value of Brilliant Color. (Available only in the normal Power ON status) No display is shown when projector received command. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 16 / 47