Sanyo PDG-DWL100 RS232C Expand - Page 25

PDG-DWL100 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_INPUTSEARCH Command Command "CF_INPUTSEARCH_%1" [CR] %1 "ON Set Input search to ON "OFF Set Input search to OFF Details On/Off Input search. (Valid only when in the normal Power ON status.) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.10.2 CF_LANG Command Command "CF_LANG_%1" [CR] "ENG Select ENGLISH "DEU Select German "FRA Select French "ITA Select Italian "ESP Select Spanish "SVE Select Swedish "JPN Select Japanese "CHI Select Chinese %1 "POL Select Pohland "TUR Select Turkish "GRE Select Greece "NOR Select Norway "CZE Select Czech "KOR Select Korea "RUS Select Russia "POR Select Portuguese "HUN Select Hungarian Details Select language for OSD. (Valid only when in the normal Power ON status.) The language set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.10.3 CF_P-MANETIME Command Command "CF_P-MANETIME_%1" [CR] "000~180 Power management step = 10 %1 "UP Increase the timer for Power management "DN Decrease the timer for Power management Details Set/Cancel Power Management. (Valid only when in the normal Power ON status.) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 25 / 47