Sanyo PDG-DWL100 RS232C Expand - Page 39

PDG-DWL100 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Commands 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time Response %1 "1" means the number of lamps. (1 lamp model→ "1") "Y"/"N" means if it has reached its replacement time or not. e.g. "1Y projector is 1 lamp model and Lamp is over its replacement time Unacceptable "?"[CR] 9.9.2 CR_LAMPH Command Command "CR_LAMPH" [CR] Details Get total running time of lamp by hour (h) *Actual running time, not corresponding value Acceptable "000_%1"[CR] Correspondence %1, %2 "00000"~"99999" Unacceptable "?" [CR] 9.9.3 CR_LAMPMODE Command Command "CR_LAMPMODE" [CR] Details Get Lamp mode setting status Acceptable "000_%1" [CR] Correspondence %1 "OFF NORMAL is selected. "ON ECO is selected. Unacceptable "Error Code" [CR] 9.9.4 CR_LAMPSTS Command Command "CR_LAMPSTS" [CR] Details Get the information of Lamp lighting status Acceptable "000_%1" [CR] " **** " A number of * should be among 1-4. First character shows how many lamps are incorporated in projector. (1,2 or 4 ) Second character shows following status in order of lamp number. "I" Lamp is ON Correspondence %1 "O" Lamp is OFF "X" Lamp failure e.g. "1I" 1 Iamp model and Lamp is ON "2IO 2 lamps model and No.1 Lamp is ON and No.2Lamp is OFF "4IOXI" 4 lamps model and No.1,No.4 lamps are ON. No.2 lamp is OFF and No.3 model is failed. Unacceptable "?" [CR] 39 / 47