Sanyo PDG-DWL100 RS232C Expand - Page 26

PDG-DWL100 Expand Serial Command Functional Specifications 8.10.4 CF_FDEFAULT Command Command "CF_FDEFAULT_%1" [CR] %1 "RST" Details Return the settings to Factory Default status (Valid only when in the normal Power ON status) No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.10.5 CF_RS232MODE Command Command "CF_RS232MODE_%1" [CR] %1 "RS232 Set RS232 "LAN Set LAN Details Select RS232 mode. (Valid only when in the normal Power ON status.) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.10.6 CF_STANDBYMODE Command Command "CF_STANDBYMODE_%1" [CR] %1 "ON Set Standby mode On "OFF Set Standby mode Off Details Select Eco Standby mode. (Valid only when in the normal Power ON status.) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.10.7 CF_CCAPTION Command Command "CF_CCAPTION_%1" [CR] "OFF Set Off %1 "CC1 Set CC1 "CC2 Set CC2 Details Select Closed caption. (Valid only when in the normal Power ON status.) The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 26 / 47