Sanyo PDG-DWL100 RS232C Expand - Page 19

PDG-DWL100 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1" [CR] "HDMI Select HDMI "COMPUTER1 Select Computer 1 "YPBPR1 Select YPbPr 1 %1 "COMPUTER2 Select Computer 2 "YPBPR2 Select YPbPr 2 "SCART Select Scart "VIDEO Select Video "S-VIDEO Select S-video Details Select Input (Valid only when it is in the normal Power ON status.) This command works the same way as "SOURCE" button of the projector and remote control. The projector shows Image OSD at receiving the command. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.6.2 CF_SYSTEM Command Command "CF_SYSTEM_%1" [CR] Input is Video "AUTO Select MODE 1 "NTSC Select MODE 2 "PAL Select MODE 3 "SECAM Select MODE 4 %1 "AUTO Select MODE 1 Input is "NTSC Select MODE 2 S-Video "PAL Select MODE 3 "SECAM Select MODE 4 Details Select system of the currently selected Input. (Valid only when in the normal Power ON status.) When selected Input does not meet the requirement for the specified %1, return "101" [CR] and the command is not executed. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.6.3 CF_INPUT1 Command Command "CF_INPUT1_%1" [CR] %1 "HDMI Select HDMI Details Select HDMI (Valid only when it is in the normal Power ON status.) The projector shows Image OSD at receiving the command. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 19 / 47