Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 105
Rack mounting poses risks
View all Sennheiser EW-D SKP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
EW-DX EM 2 rack receiver Installing receivers in a rack Observe the following instructions when mounting the receiver in a rack. The mounting brackets for installing the receiver in the rack can be found in the packaging under the tray: Rack mount angles Power supply adapters Power supply unit CAUTION! Rack mounting poses risks When installing the device in a closed 19" rack or multi-rack assembly, please consider that, during operation, the ambient temperature, the mechanical load and the electrical potentials will be different from those of devices which are not mounted into a rack. ▷ Make sure that the ambient temperature within the rack does not exceed the permissible temperature limit stated in the specifications. See "SPECIFICATIONS". ▷ Ensure sufficient ventilation; if necessary, provide additional ventilation. ▷ Make sure that the mechanical load of the rack is even. ▷ When connecting to the power supply system, observe the information indicated on the type plate. Avoid overloading the circuits. If necessary, provide overcurrent protection. ▷ When mounting in a rack, please note that intrinsically harmless leakage currents of the individual power supply units may accumulate, thereby exceeding the permissible limit value. As a remedy, ground the rack via an additional ground connection. 104