Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 138
key to cancel and not assign new frequen
![]() |
View all Sennheiser EW-D SKP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
EW-DX EM 2 rack receiver ▷ Press the jog dial to open your selected option. ▷ Select a frequency from which to start the scan. ▷ Press the jog dial to start the scan. The spectrum is scanned for free frequencies above the selected frequency. After the scan free frequencies are displayed, which you can then assign to the channels. ▷ Press the jog dial to assign the free frequencies to the receiving channels. or ▷ Press the ESC key to cancel and not assign new frequencies. ▷ Next, synchronize the receiving channels with the corresponding transmitters to establish the radio link at the new selected frequencies ("Synchronizing the receiver and transmitter"). 137
![](/manual_guide/products/sennheiser-ewdx-em-2-instruction-manual-frequently-asked-questions-evolution-wireless-digital-ewd-ewdx-ewdp-pdf-f2d69e4/138.png)
EW-DX EM 2 rack receiver
137
▷
Press the
jog dial
to open your selected option.
▷
Select a frequency from which to start the scan.
▷
Press the
jog dial
to start the scan.
The spectrum is scanned for free frequencies above the se
-
lected frequency.
After the scan free frequencies are displayed, which you
can then assign to the channels.
▷
Press the
jog dial
to assign the free frequencies to the re
-
ceiving channels.
or
▷
Press the
ESC
key to cancel and not assign new frequen
-
cies.
▷
Next, synchronize the receiving channels with the corre
-
sponding transmitters to establish the radio link at the new
selected frequencies ("Synchronizing the receiver and
transmitter").