Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 166

EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ At the last position, press the SET button to save the selected name. If you enter a name for the radio link in the Name menu item on the receiver and then synchronize the receiving channel with the transmitter, the name entered in the transmitter is overwritten with the name entered in the receiver. Frequency menu item In this menu item, you can set the transmitter's transmission frequency. ▷ Press the UP or DOWN button to set the frequency's MHz range. ▷ Press the SET button to confirm your selection. ▷ Press the UP or DOWN button to set the frequency's kHz range. ▷ Press the SET button to save the set frequency. If you set a frequency for the channel using the Frequency menu item on the receiver or via the Scan / Auto Setup function and then synchronize the receiving channel with the transmitter, the frequency entered in the transmitter is overwritten by the frequency set in the receiver. Low Cut menu item In this menu item, you can adjust the value for the low cut filter. • Setting range: 60 Hz, 80 Hz, 100 Hz, 120 Hz 165