Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 238

Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 Connecting/disconnecting the charger to/ from the power supply system You can operate the charger either with the Sennheiser NT 1235 CS power supply unit or with Power over Ethernet (PoE IEEE 802.3af Class 0). Please refer to the following information. Power from the NT 12-35 CS power supply unit Use only the NT 12-35 CS power supply unit from Sennheiser. It is designed for your charger and ensures safe operation. The power supply unit is available either separately (Sennheiser article number 508995) or together with the charger as a kit (see "CHG 70N network-enabled charger"). To connect the charger to the power supply system: ▷ Connect the hollow jack plug of the power supply unit to the DC in socket on the charger. ▷ Pass the cable through the strain relief. ▷ Plug the power supply unit into the wall outlet using the correct power cable for your country. To completely disconnect the charger from the power supply system: ▷ Unplug the power cable from the wall socket. ▷ Unplug the hollow jack plug of the power supply unit from the DC in socket on the charger. 237