Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 195
dB, Cable Emulation
View all Sennheiser EW-D SKP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If you set a value for the channel's low cut filter using the Low Cut menu item on the receiver and then synchronize the receiving channel with the transmitter, the value entered in the transmitter is overwritten by the value set in the receiver. Trim menu item In this menu item, you can adjust the audio level of the transmitter as well as the gain of the wireless link (can be set only on the receiver) to suit input signals of different volumes. • Setting range: -12 dB to +6 dB in increments of 1 dB ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If you set a value for the channel in the Trim menu item on the receiver and then synchronize the receiving channel with the transmitter, the value entered in the transmitter is overwritten with the value entered in the receiver. Cable Emulation menu item In this menu item, you can emulate instrument cable lengths. • Setting range: Off, Type 1, Type 2, Type 3 ▷ Press the UP or DOWN button to set the desired value. 194