Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 142
System -> Link Density menu item
View all Sennheiser EW-D SKP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
EW-DX EM 2 rack receiver System -> Link Density menu item Link Density mode (LD mode) LD mode doubles the number of usable carrier frequencies in the available spectrum, as the minimum distance for the equidistant frequency grid is halved. This is achieved by reducing the modulation bandwidth of the transmitter. This means that a much smaller frequency spacing between neighboring frequencies can be selected, and therefore more frequencies can be used in the same available spectrum without intermodulation. LD mode is recommended if the following criteria are met: • The required number of channels cannot be achieved using the normal mode, as there may be only a small spectrum available. • The distance between the transmitters and the antennas is not too great. To open the Link Density menu item: ▷ In the System menu, navigate to the Link Density menu item. ▷ Press the jog dial to open the menu. The following view is displayed: ▷ Turn the jog dial to choose between the On and Off options. ▷ Press the jog dial to save your setting. ▷ If you have enabled LD mode, the receiver must be restart- ed. 141