Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 123

EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Name menu item In the Name menu item, you can define the name of the link for the channel in question. This name is the name of the radio link between the transmitter and receiving channel. You can set the name of the receiver as it will appear in a network from the This Device menu in the system menu. See "System -> This Device menu item". To open the Name menu item: ▷ In the menu, navigate to the Name menu item for the de- sired channel. ▷ Press the jog dial to open the menu. The following view is displayed: To enter the desired link name: ▷ Turn the jog dial to select the desired character. ▷ Press the jog dial to go to the next position. ▷ At the last position, press the jog dial to save the selected name. or ▷ Press the ESC button to cancel the entry without saving the setting. For the chosen link name to appear on the display of the received transmitter, you must synchronize the channel ("Connecting to the EW-DX EM 2 receiver / synchronizing the EWDX EM 2"). 122