Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 137
Scan / Auto Setup, jog dial, Scan Me, Network, Scan Network
View all Sennheiser EW-D SKP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Scan / Auto Setup menu item The receiver lets you scan the frequency spectrum and display all of the free frequencies in the selected frequency range. The automatic frequency setup can be used to distribute the free frequencies to all of the EW-DX EM 2 devices available in the network automatically. ▷ Switch off all transmitters before you perform the scan. If transmitters are still switched on, they are detected as unavailable frequencies and the frequencies that are actually available cannot then be used. To perform the automatic frequency setup for all devices in the network, the Auto Setup function must be enabled in the receiver's system menu: "System -> Auto Setup menu item". To open the Scan / Auto Setup menu item: ▷ In the menu, navigate to the Scan / Auto Setup menu item for the desired channel. ▷ Press the jog dial to open the menu. The following view is displayed: ▷ Turn the jog dial to choose between the Scan Me and Scan Network options. • Scan Me: The frequency scan and the frequency setup are performed only for the selected receiving channel. • Scan Network: The frequency scan and the frequency setup are performed for both channels of the receiver as well as for all other receivers available in the network. 136