Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 196

EW-DX SK | EW-DX SK 3-PIN bodypack transmitter ▷ Press the SET button to confirm your selection. If you set a value for the channel in the Cable Emul. menu item on the receiver and then synchronize the receiving channel with the transmitter, the value entered in the transmitter is overwritten with the value entered in the receiver. Test Tone menu item In this menu item, you can activate a test tone that the transmitter transmits instead of the input signal. You can use this feature to level out the system, for example. • Setting range: Off, -90 dB to 0 dB in 6 dB increments ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. Mute Button menu item In this menu item you can set the function of the transmitter's mute switch. • Setting range: • Disabled: The mute switch has no function. • RF Mute: The RF signal is deactivated when the mute switch is on. • AF Mute: The audio signal is muted when the mute switch is on. ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If you set a function for the transmitter's mute switch in the Mute Mode menu item on the receiver and then synchronize the receiving channel with the transmitter, the value entered 195