Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 206
est volume setting.
![]() |
View all Sennheiser EW-D SKP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
EW-DP EK portable receiver Outputting audio signals The EW-DP EK has an unbalanced 3.5 mm audio output and an unbalanced 3.5 mm headphone output. CAUTION Danger due to high volume levels Volume levels that are too high may damage your hearing. ▷ Turn down the volume of the headphone output before you put on the headphone. Recommended impedance for headphones (HD 25 = 70 ohms). For headphones with < 32 ohms of impedance, the audio signal can be very loud at the lowest volume setting. To connect a 3.5 mm jack cable: ▷ Plug the jack cable into the MIC OUT socket on the EW-DP EK. 205
![](/manual_guide/products/sennheiser-ewdx-em-2-instruction-manual-frequently-asked-questions-evolution-wireless-digital-ewd-ewdx-ewdp-pdf-f2d69e4/206.png)
EW-DP EK portable receiver
205
Outputting audio signals
The EW-DP EK has an unbalanced 3.5 mm audio output and an
unbalanced 3.5 mm headphone output.
CAUTION
Danger due to high volume levels
Volume levels that are too high may damage your hearing.
▷
Turn down the volume of the headphone output before you
put on the headphone. Recommended impedance for head
-
phones (HD 25 = 70 ohms). For headphones with < 32 ohms
of impedance, the audio signal can be very loud at the low
-
est volume setting.
To connect a 3.5 mm jack cable:
▷
Plug the jack cable into the MIC OUT socket on the EW-DP
EK.