Sennheiser EW-D SKP Instruction manual and frequently asked questions - Evolut - Page 110
No microphone module is mounted on the handheld trans
![]() |
View all Sennheiser EW-D SKP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Meaning of the LEDs EW-DX EM 2 rack receiver The two LEDs on the front of the receiver indicate the following information for channel 1 and channel 2. The LED is green: ▷ The link between the transmitter and receiving channel is established. ▷ The audio signal is active. The LED is yellow: ▷ The link between the transmitter and receiving channel is established. ▷ The audio signal is muted. or ▷ No microphone module is mounted on the handheld trans- mitter. The LED is flashing yellow: ▷ The link between the transmitter and receiving channel is established. ▷ The audio signal is overdriven (clipping). The LED is continuously red: ▷ No link between the transmitter and receiving channel. 109
![](/manual_guide/products/sennheiser-ewdx-em-2-instruction-manual-frequently-asked-questions-evolution-wireless-digital-ewd-ewdx-ewdp-pdf-f2d69e4/110.png)
EW-DX EM 2 rack receiver
109
Meaning of the LEDs
The two LEDs on the front of the receiver indicate the follow
-
ing information for channel 1 and channel 2.
The LED is green:
▷
The link between the transmitter and receiving channel is
established.
▷
The audio signal is active.
The LED is yellow:
▷
The link between the transmitter and receiving channel is
established.
▷
The audio signal is muted.
or
▷
No microphone module is mounted on the handheld trans
-
mitter.
The LED is flashing yellow:
▷
The link between the transmitter and receiving channel is
established.
▷
The audio signal is overdriven (clipping).
The LED is continuously red:
▷
No link between the transmitter and receiving channel.