Sharp AR-M162E AR-M162E AR-M207E Operation Manual Suite - Page 144

PROGRAMMING A KEY OPERATOR CODE 1 Press the [SPECIAL FUNCTION] key. DUPLEX SPECIAL FUNCTION DUPLEX SCAN DUPLEX SCAN ACC. The special function screen will appear. SPECIAL FUNCTION SPECIAL MODES ORIG. SIZE ENTER PAPER SIZE SET DISPLAY CONTRAST 2 Select "KEY OPERATOR PRG." with the [ ] or [ ] key. GH PQR DUPLEX SPECIAL FUNCTION DUPLEX SCAN SPECIAL FUNCTION PAPER SIZE SET DISPLAY CONTRAST TOTAL COUNT KEY OPERATOR PRG. 3 Press the [OK] key. BACK OK Enter key operator code. GHI The key operator code entry screen appears. KEY OPERATOR CODE: ----- 4 Use the numeric keys to enter the five-digit key operator code. OK ABC DEF GHI JKL MNO PQRS TUV WXYZ FUNCTION @.-_ ACC. #-C READ-END MODE SELECT KEY OP. # CHANGE COPIER PRINTER SCANNER • If this is the first time you are programming the key operator code, enter the factory default code. (Page 1) • " " appears for each digit that you enter. • The special modes screen will appear with "KEY OP. # CHANGE" selected. 5 Press the [OK] key. OK KEY OP. # CHANGE The key operator code change screen appears. PRESENT:22222 NEW :----- 6 Enter the new 5-digit key operator code with the numeric keys. WXYZ KEY OP. # CHANGE PRESENT:22222 NEW :111-- Any 5 digits can be used for the key operator code. 7 Press the [OK] key. OK • The previously programmed key operation code is replaced by the new key operator code. • Press the [CA] key to return to the base screen. 2