Sharp AR-M257 AR-M257 AR-317 Operation Manual Suite - Page 87
TROUBLESHOOTING AND MAINTENANCE, Message, Cause and solution, SELECTED PAPER TRAY IS OUT
![]() |
View all Sharp AR-M257 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
TROUBLESHOOTING AND MAINTENANCE Message SELECTED PAPER TRAY IS OUT OF SERVICE. CHECK STAPLER POSITION OR STAPLE JAM. (CALL FOR SERVICE SOON.) (MAINTENANCE REQUIRED.) CALL FOR SERVICE. CODE: PLEASE CHECK THE ORIGINAL SIZE. JOB IS CANCELED. Cause and solution Contact your SHARP service center. Staples are jammed in the finisher or the staple case is not attached correctly. Check the staple case. If the message still appears after removing the jammed staples, disable the stapler using "DISABLING OF STAPLER" in the key operator programs (See the "Key operator's guide.), and contact your SHARP service center. It will soon be time for regular maintenance. Contact your SHARP service center. It is time for regular maintenance. Contact your SHARP service center. Turn off the power and then turn it back on. If this does not clear the message, write down the 2-digit main code and 2-digit sub-code and promptly contact your SHARP service center. The original in the RSPF is longer than the size that was detected. Reinsert the original, make sure that the size indicated in the touch panel is the same as the actual size, and begin copying. You can also select mixed feeding to copy onto paper that matches each original size after all originals have been scanned. Page - 76 - - 5 61
![](/manual_guide/products/sharp-arm257-arm257-ar317-operation-manual-suite-cb00beb/87.png)