Sharp AR-M257 AR-M257 AR-317 Operation Manual Suite - Page 89
The memory become full while the originals were, being scanned. - troubleshooting
View all Sharp AR-M257 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
TROUBLESHOOTING AND MAINTENANCE Problem Original size is not selected automatically, or copying does not take place on paper that matches the original size. Paper size for a paper tray cannot be set. Order of copies is incorrect. The job is canceled after the originals were being scanned. Not all pages are copied. The RSPF cannot be used. Lighting fixture flickers. Cause and solution The RSPF was not opened completely when the original was placed on the document glass. → Open the RSPF completely, place the original on the document glass, and close the RSPF. The original contains large black solid areas. → If the original contains any large black solid areas, the original size may not be detected automatically. Use the [SPECIAL MODES] key to select the original size. The original is smaller than 5-1/2" x 8-1/2" size. → When the original is smaller than 5-1/2" x 8-1/2" size, the size cannot be detected. Use the [PAPER SELECT] key to select the desired paper size. The original is not a standard size. → When the original is not a standard size, the size cannot be detected. Manually select the closest standard original size, or use the [PAPER SELECT] key to select the desired paper size. A copy, print job, or received fax is being printed. → Set the correct paper size after printing is finished. Operation has temporarily stopped because the tray is out of paper or a misfeed occurred. → Load paper or remove the misfeed, finish the copy job, and then set the paper size. During an interrupt copy job. → Set the correct paper size after the interrupt copy job is finished. Misfeed occurs. → Remove the misfed paper. Paper tray settings are prohibited in the key operator programs. → Change the setting in the key operator programs to permit paper tray settings. The originals were placed in the wrong order. → When using the document glass, scan the originals one sheet at a time beginning from the first page. When using the RSPF, insert the originals with the first page on top and facing up. The memory become full while the originals were being scanned. → When using a function such as pamphlet copy or multi shot copy where all original pages are scanned into memory before copying begins, scanning will stop and copying will not take place if the memory becomes full. The number of pages that can be scanned into memory can be increased by installing more memory. The memory become full while the originals were being scanned. → When the memory becomes full while the originals are being scanned, you can select whether you want to continue the job and print only those originals that were scanned, or cancel the job. If you continue the job, copies will only be made of the originals that were scanned, and thus all originals cannot be copied at once. Use of the RSPF has been prohibited in the key operator programs. → Enable use of the RSPF in the key operator programs. The same power outlet is used for the lighting fixture and the machine. → Connect the machine to a power outlet which is not used for other electric appliances. Page - 47 22 22, 47 - 19, 66 34 66 Key operator's guide 23 78 - Key operator's guide 4 5 63