Sharp BD-HP25U BD-HP25U Operation Manual - Page 35

Video/Picture/Music Playback Displaying Still Images (JPEG files) CD-R CD-RW DVD-R DVD-RW USB This Player can display still images (JPEG files) recorded on CD-R/RW discs, DVD-R/RW discs and USB memory devices or via a home network. • For details on the still images that you can display using this player, refer to page 11. • Still images are played one by one while during "Slide show", they are automatically replaced one after another. • When data in the USB memory device is played back, playback from the USB memory device will stop when OPEN/CLOSE on the remote control or the player is pressed or when a disc is inserted into the player. 1 Load a disc or a USB memory device* containing Still Images (JPEG files). * When you insert or remove a USB memory device, be sure to turn the main power off and make sure that "Quick Start" is set to "No" (See page 43). • When the wireless LAN adapter is not inserted into the USB1 terminal on the rear of the player, it is recommended that the USB memory device be connected to the USB2 terminal. NOTE • A USB memory device can be used with either the USB1 or USB2 terminal. When two USB memory devices are connected to both terminals at the same time, in certain situations the USB1 terminal may give priority to Local Storage and JPEG files cannot be played back using this terminal. 2 Press a/b to select "Picture", then press d or ENTER. 3 Press a/b to select "DVD/CD*", "USB Memory Device" or "Home Network", then press d or ENTER. * Display name varies depending on the type of media inserted. • If only a "DVD/CD" or a USB memory device is inserted, the "DVD/CD" or "USB Memory Device" selection screen does not appear. In such cases, after step 2, proceed to step 4. 4 Press a/b to select a folder or file. • When you select a folder, press ENTER to open it, and then press a/b to select a file in the folder. Folder 1 CD 1 Folder 1 2 Folder 2 3 Folder 3 4 Folder 4 5 Image 01.jpg 6 Image 02.jpg 1/All 14 files and folders • To set slide show speed/repeat playback, press D (Yellow) (Slide Show Menu). Slide Show Menu Slide Show Speed Repeat Mode Setting Guide Display Setting Setting of slide show playback speed Setting of slide show repeat playback Guide display setting during still image display 5 Press ENTER to display the selected file. • The selected still image appears on the screen. 1/77 6 To return to the HOME screen, press c, and then press HOME or EXIT. Operational buttons during still image display Buttons Description f/ g Go to the previous/next picture in the same directory. d/ e j Return to the selection screen. C (Blue) D (Yellow) a b Rotate the picture by 90 degrees to the left. Rotate the picture by 90 degrees to the right. Play back Slide Show. • Return to slide show playback when paused. Pause slide show playback. c A (Red) Stop still image display/slide show playback. Guide display on/off. NOTE • Thumbnail data will be displayed when JPEG files from a digital camera contain thumbnail data. • An icon will be displayed for JPEG files which do not contain thumbnail data. Playback 33