Sharp BD-HP25U BD-HP25U Operation Manual - Page 49
When selecting Wireless
UPC - 074000355026
View all Sharp BD-HP25U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
SETTINGS 6 Select "Next", then press ENTER. • If selecting "Yes" in the step 5, go to the step 8. 7 Enter your DNS address. Enter your DNS address. Primary Secondary Next • The primary and secondary DNS addresses are entered using the screen for inputting characters. (See page 49.) Regarding each of the setup values, confirm the specifications of your broadband router. 8 Select "Next", then press ENTER. 9 For testing the connection to the Internet, after confirming the settings, press a/b to select "Test", then press ENTER. • "Test" is available only when setting to obtain the IP address automatically. "Test" cannot be selected if the IP address has not been obtained automatically. Confirm the current setting. IP Address : xxx xxx xxx xxx Netmask : xxx xxx xxx xxx Gateway : xxx xxx xxx xxx DNS Address : xxx xxx xxx xxx xxx xxx xxx xxx MAC Address : xx xx xx xx xx xx Test Complete • As a result of the test, if the Internet connection fails, enter the setup values manually. 10 Press a/b to select "Complete", then press ENTER. 11 Press HOME or EXIT to return to the HOME screen. • To perform other settings, press j. When selecting Wireless CAUTION • We recommend writing down the MAC address of the connected wireless LAN adapter in this operation manual (page 48) and keeping it in a safe place. The MAC address is labeled on the adapter or displayed on the "Current Ethernet setup info." screen (See step 5 below). • When performing the wireless communication setup, security information for the wireless router/access point (WEP, WPA or WPA2 key) is required. Check your wireless router/access point's information prior to setup. NOTE • Wireless communication setup cannot be performed when the wireless LAN adapter is not inserted. • Before this player can access the Internet wirelessly, setup of a wireless router/access point is required. 1 Press a/b to select "Settings", then press d or ENTER. 2 Press a/b to select "Communication Setup", then press d or ENTER. 3 Press a/b to select "Ethernet Setup (Wireless)", then press d or ENTER. 4 Press a/b to select "Change", then press ENTER. Current Ethernet setup info. MAC Address : xx xx xx xx xx xx Access Point : Not Selected IP Address : Auto Setup Netmask : Auto Setup Gateway : Auto Setup DNS : Auto Setup Change Initialize • For initializing the current setting, select "Initialize", then press ENTER. 5 The player scans all of the available access points and displays the points with the "Other Network" selection bar on the screen. • During searching access point(s), "Accessing..." appears on the screen. • Up to 6 items (5 access points and the "Other Network" selection bar) are displayed on the screen. • When there are six or more items retrieved, display the next screen by selecting "Next", then pressing ENTER. (The "Other Network" selection bar is always displayed last.) When no available access points are retrieved, only the "Other Network" selection bar is displayed on the screen. 6 Press a/b to select "desired access point" or "Other Network", then press ENTER. • For access points which are set to hide the SSID using the wireless router, select "Other Network" to set the access point. Select the access point. XXXXXXXXXXXX YYYYYYYYYYYY Other Network • If selecting "desired access point", go to step 9. • If selecting "Other Network", go to the next step. Settings (Continued on the next page) 47