Sharp BD-HP25U BD-HP25U Operation Manual - Page 50
Information on MAC addresses
UPC - 074000355026
View all Sharp BD-HP25U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
SETTINGS 7 Press ENTER, then enter the access point name. • The access point name is manually entered using the screen for inputting characters. (See page 49.) Enter the access point name. Access Point: Next 8 Select "Next", then press ENTER. 9 Press a/b to select your appropriate security key, then press ENTER. • When selecting WPA/WPA2, selectable security keys are PSK/TKIP and PSK/AES. 11 Select "Next", then press ENTER. 12 For testing after confirming the settings, select "Test", then press ENTER. • If the test has failed, an error message appears. Retry to perform the settings after checking that the connection (page 19) is performed properly. Confirm your setting. Access Point: XXXXXXXXXXXX Security key: XXXXXXXXXXXX Test 13 Follow steps 5-11 of "When selecting Cable" on page 46 to complete the network connection settings. Select the security key. OPEN WEP WPA-PSK(AES) WPA-PSK(TKIP) WPA2-PSK(AES) WPA2-PSK(TKIP) 10 Press ENTER, then enter the security key code. • Enter the exact same security key which has been set in the wireless router. • The security key code is manually entered using the screen for inputting characters. (See page 49.) Enter the security key. Security key: Information on MAC addresses A MAC address is a unique ID number for network equipment. A MAC address is necessary for MAC address filtering on the wireless router/ access point. Before the wireless communication setup is performed, we recommend writing down the MAC address of the connected wireless LAN adapter and keeping it in a safe place. The MAC address is labeled on the adapter. (The MAC address is displayed on the "Current Ethernet setup info." screen when wireless communication is set (See step 4 of page 47).) MAC address Next 48