Sharp LC-50LB261U Use and Care Guide - Page 19
DVI (same as HDMI but requires an audio connection)
View all Sharp LC-50LB261U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
LC-50LB261U Sharp 50" LED TV DVI (same as HDMI but requires an audio connection) Note You must use the HDMI 3/DVI jack to connect a cable or satellite box using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. On your TV Side of TV HDMI cable with HDMI-DVI adapter Cable or satellite box HDMI cable Audio cable connector connector HDMI 3/DVI PC/DVI jack AUDIO IN jack Audio cable Back of TV 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI 3/DVI jack on the side of your TV. 5 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jacks on the cable or satellite box. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Press INPUT to open the INPUT SOURCE list. 8 Press S or T to select HDMI 3, then press ENTER. 14 www.sharpusa.com