Sharp LC-50LB261U Use and Care Guide - Page 33
DVI same as HDMI but requires an audio connection, Side of TV
![]() |
View all Sharp LC-50LB261U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
LC-50LB261U Sharp 50" LED TV DVI (same as HDMI but requires an audio connection) Note You must use the HDMI 3/DVI jack to connect a computer using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. Side of TV On your TV HDMI cable with HDMI-DVI adapter HDMI cable Audio cable connector connector HDMI 3/DVI PC/DVI jack AUDIO IN jack Audio cable Back of TV 1 Make sure that your TV's power cord is unplugged and the computer is turned off. 2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the computer. 3 Connect the other end of the cable to the HDMI 3/DVI jack on the side of your TV. 4 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT (headphone) jack on the computer. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 5 Plug your TV's power cord into a power outlet, then turn on your TV and the computer. 6 Press INPUT to open the INPUT SOURCE list. 7 Press S or T to select HDMI 3, then press ENTER. 8 Adjust the display properties on the computer, if necessary. 28 www.sharpusa.com
![](/manual_guide/products/sharp-lc50lb261u-use-care-guide-a256cce/33.png)