Sharp LC-70UH30U Operation Manual - Page 105
Control of the TV
![]() |
View all Sharp LC-70UH30U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
"General". Remote Control App When "Remote Control App" is selected, "Change" will be highlighted. Press (ENTER). Detailed Settings Make the detailed settings (Login ID, Password). Follow the on-screen instructions to configure the settings. Device name Set the name of the TV displayed on other network devices. Configure the settings from "HOME" > "Settings" > "Device" > "About" > "Device name". >> Communication Conditions for RS-232C Set the RS-232C communication settings on the PC to match the TV's communication conditions. The TV's communication settings are as follows: Baud rate: 9,600 bps Data length: 8 bits Parity bit: None Stop bit: 1 bit Flow control: None Communication procedure Send the control commands from the PC via the RS-232C. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command. ENG 82 ENGLISH | FRANÇAIS | ESPAÑOL
![](/manual_guide/products/sharp-lc70uh30u-operation-manual-42922f3/105.png)