Sharp LC-70UH30U Operation Manual - Page 14
Using the Touchpad Remote Control Unit For UH30U model
View all Sharp LC-70UH30U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
> Using the Touchpad Remote Control Unit (For UH30U model) Preparation Before using the Touchpad Remote Control Unit, you have to follow the procedure shown below to pair the unit with the TV. 1 Select "HOME" > "Settings" > "Remote & accessories" > "Add accessory". 2 Press the (HOME) and (Back) buttons on the Touchpad Remote Control Unit at the same time for 5 seconds. About 20 seconds later, "SHARP Remote control device" is shown on TV screen. 3 Select "SHARP Remote control device" on TV screen, and then press (ENTER) on the IR Remote Control. About 5-10 seconds later, PAIRED is shown. Preparation is complete. NOTE In preparation 3, if COULDN'T PAIR is shown, please try "preparation 1-3" again. Pairing success/failure may be influenced by the surrounding wireless/RF environment. Mouse/Flick mode switch button Switch the touchpad between Mouse mode and Flick mode. NOTE The default is Flick mode. Some apps may not function in Mouse mode. If an app does not function, switch to Flick mode. (Channels) / (Discover) / (Devices) / (TV Setup) Display the Channels/Discover/Devices/TV Setup screen. Slide bar You can slide to display the Channels/Discover/Devices/TV Setup screen. Slide from the left edge to the center to display the Devices or TV Setup peek screen. Slide from the left edge to the right edge to display the Devices or TV Setup full screen. Slide from the right edge to the center to display the Channels or Discover peek screen. Slide from the right edge to the left edge to display the Channels or Discover full screen. ENG 22 ENGLISH | FRANÇAIS | ESPAÑOL