Sharp LC-70UH30U Operation Manual - Page 112
Using the Internet
View all Sharp LC-70UH30U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
"Settings" > "Device" > "Network". NOTE To connect your TV to the Internet, you must have a broadband Internet connection. If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask your Internet service provider or telephone company. When an Internet connection is made, an Ethernet and wireless connection cannot be used at the same time. Use only one of the connection types. Using an ETHERNET cable Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the TV to your broadband router (commercially available). ETHERNET cable Broadband router Modem PC Internet Using the wireless LAN This TV is equipped with a wireless LAN function. For a wireless LAN connection, you must use wireless setup to connect the access point and TV. Wireless LAN router/ access point Modem PC Internet >> NOTE This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications that do not comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter. A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the wireless LAN signal may be poor or drop, or the connection speed may become slower. - When used in buildings made with concrete, reinforced steel, or metal - When placed near objects that obstruct the signal - When used with other wireless devices that emit the same frequency - When used in the vicinity of microwave ovens and other devices that emit a magnetic field, electrostatic charge, or electromagnetic interference When there is significant interference in the 2.4-GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2.4-GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN router/access point that supports IEEE802.11ac (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of your access point. Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certification. A wireless LAN router/access point is required to connect the TV to the Internet using a wireless LAN. See the operation manual of your access point for setup. If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a connection. In this case, disable the stealth mode on the access point. A stable connection speed is required to play back streaming content. Use an Ethernet connection if the wireless LAN speed is unstable. Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. Please follow the legislation in your country when using the wireless LAN outdoors. If you have failed to connect to the Internet in the above operation, then an error message will appear. In this case, press EXIT to exit from the connected TV feature to make changes to the network settings. If you still cannot connect to the Internet, please consult your Internet service provider or telephone company. You cannot configure the settings from "HOME" > "Settings" > "Device" > "Network" while using an application. If you must configure your "Network" settings, press the EXIT key to exit the function. ENG 91 ENGLISH | FRANÇAIS | ESPAÑOL