Sharp MX-M314N Operation Guide - Page 112

COPIER MAKING A COPY USING THE DOCUMENT GLASS To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass. Original size detector Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder. Document glass scale mark Document glass scale mark A5 (5-1/2" x 8-1/2") B5R A4R (8-1/2" x 11"R) 1 B5 A4 (8-1/2" x 11") B4 (8-1/2" x 14") A3 (11" x 17") • Align the corner of the original with the tip of the arrow mark on the document glass scale. • Place the original in the appropriate position for its size as shown above. • After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. Special Modes Check the paper to be used. Exposure Auto 1. A4 2. A4R 3. B4 4. A3 Plain A4 2-Sided Copy Output File Make sure that the desired paper (tray) is selected. • To change the paper (tray), touch the [Paper Select] key. PAPER TRAYS (page 2-11) Quick File 2 Copy Ratio Original Paper Select 100% Auto A4 Auto A4 Plain Preview Depending on the size of the placed original, there may be cases where the same size of paper as the original is not selected automatically. In this event, change the paper size manually. 2-14 Contents