Sharp MX-M314N Operation Guide - Page 150

COPIER Changing the copy settings for each set of originals The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals. Perform the step below before pressing the [Start] key to scan the originals in step 4 above. Touch the [Change] key. 1 Place next original and press [Start]. to change copy settings, press [Change]. Change Read-End Read-End Change the desired copy settings in the screen that appears and press the [Start] Plain A4 key. Exposure 2 Auto 1. A4 2. A4R 3. B4 4. A3 Scanning of the originals will begin using the changed copy settings. To cancel the copy setting changes and begin copying without Copy Ratio 100% Original Auto A4 Paper Select Auto A4 Plain scanning the new originals, touch the [Read-End] key. • The original size cannot be changed manually with the [Original] key. If the automatic original detection function is operating, the original size will be detected for each set of originals placed. • When the bypass tray is selected, it is not possible to change the paper type. • If "XY Zoom" was set for the ratio when the previous original was scanned, it will not be possible to change the ratio. • When "Job Build" is used in combination with the functions below, the [Change] key will not appear in the screen of step 1 above. Pamphlet copy, tandem copy, covers/inserts, transparency inserts, multi-shot, book copy, tab copy, staple sort 2-52 Contents