Sharp MX-M314N Operation Guide - Page 504
Select the mode and display the image settings screen., Touch the [Scan Size] key., Specify the scan
View all Sharp MX-M314N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 504 highlights
SCANNER/INTERNET FAX Specifying the original scan size (by paper size) If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. 1 (2) Touch the [Original] key. The automatically detected original size appears to the right of the [Original] key. IMAGE SETTINGS (page 5-53) 2 Scan/Original OK Scan Size Auto A4 100% Send Size Auto 2-Sided Booklet 2-Sided Tablet Image Orientation Touch the [Scan Size] key. 3 Scan/Original Auto Manual A5 A5R B5 216x340 Size Input (1) Manual B5R A4 A4R 216x343 B4 A3 Long Size (2) Specify the scan size. (1) Touch the appropriate original size key. OK When the document cover is installed, the [Long size] key is not displayed. (2) Touch the [OK] key. AB Inch • If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 1000 mm (39-3/8") (the maximum height is 297 mm (11-5/8")). TRANSMITTABLE ORIGINAL SIZES (page 5-17) • To specify an Inch size for the scan size, touch the [AB Inch] key to highlight the [Inch] side and then specify the scan size. 4 Scan/Original OK Scan Size B5 100% Send Size Auto 2-Sided Booklet 2-Sided Tablet Image Orientation Touch the [OK] key. When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. In addition, when only scan destinations are selected for scan transmission or metadata transmission, scanning will take place in Mono2. 5-56 Contents