Sharp MX-M314N Operation Guide - Page 79
Placing The Original On The Document Glass
View all Sharp MX-M314N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
BEFORE USING THE MACHINE PLACING THE ORIGINAL ON THE DOCUMENT GLASS This section explains how to place the original on the document glass. Allowed original sizes Maximum original size Standard sizes A3: 297 mm (height) x 420 mm (width) 11" (height) x 17" (width) Non-standard sizes 297 mm (height) x 432 mm (width) 11-5/8" (height) x 17" (width) When the original is a non-standard size, see the appropriate explanation below for the mode you are using. 2. COPIER "SPECIFYING THE ORIGINAL SIZE" (page 2-27) 4. FACSIMILE "IMAGE SETTINGS" (page 4-46) 5. SCANNER / INTERNET FAX "IMAGE SETTINGS" (page 5-53) Open the automatic document feeder. 1 Original size detector Place the original. Place the original face down in the far left corner of the document glass. Document glass scale mark Document glass scale mark A5 (5-1/2" x 8-1/2") B5R A4R (8-1/2" x 11"R) B5 B4 (8-1/2" x 14") 2 A4 (8-1/2" x 11") A3 (11" x 17") The original should always be placed in the far left corner, regardless of its size. Align the top left corner of the original with the tip of the mark. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector and prevent correct detection of the original size. If you are placing a small non-standard size original on the document glass, it is convenient to place a blank sheet of A4 or B5 (8-1/2" x 11" or 5-1/2" x 8-1/2") paper on top of the original to facilitate detection of the original size. 1-38 Contents