Sharp MX-M314N Operation Guide - Page 72

BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAY 1 TO 4 LOADING PAPER AND CHANGING THE PAPER SIZE A maximum of 500 sheets of paper from size B5R to A3 (8-1/2" x 11R to 11" x 17") can be loaded in trays 1 to 4. Pull out the paper tray. Gently pull the tray out until it stops. 1 To load paper, go to step 3. To load a different size of paper, go to the next step. A B 2 Adjust the guide plates A and B by squeezing their lock levers and sliding them to match the vertical and horizontal dimensions of the paper to be loaded. • Guide plate A is an insertion-type plate. Remove it and insert it where the tick mark is located for loading the papers. • Guide plate B is a slidable plate. Slide it while squeezing its lock lever. • When loading 11"x17" papers, insert guide plate A on the front left side of the tray. Fan the paper. Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed. 3 Insert the paper into the tray. Load the paper with the print side face up. The stack must not 4 Indicator be higher than the indicator line (maximum of 500 sheets). line 1-31 Contents