Sharp MX-M314N Operation Guide - Page 655

SYSTEM SETTINGS Printer Condition Settings The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS application. To configure the settings, touch the [Printer Condition Settings] key. These settings can be used when the hard disk drive and printer expansion kit are installed. Printer Default Settings The default settings are used to set advanced print conditions for printing in an environment where the print driver is not used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed). When printing using the printer driver, the printer driver settings take precedence over the printer condition settings. Settings Item Selections Copies 1 - 999 sets Orientation • Portrait • Horizontal Default Paper Size A3, B4, A4, B5, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 5-1/2" x 8-1/2", 8k, 16k Default Output Tray • Centre Tray • Offset Tray*1 • Upper Tray • Right Tray Default Paper Type Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper, Colour Initial Resolution Setting • 600 x 600 dpi • 1200 x 600 dpi Disable Blank Page Print • (Disabled) • (Enabled) Line Thickness*2 0-9 2-Sided Print • 1-Sided • 2-Sided (Book) • 2-Sided (Tablet) N-Up Print*3 • 1-Up • 2-Up • 4-Up Fit To Page*4 • (Use Fit to Page) • (Do not use Fit to Page) Output • (Use Print per Unit) • (Do not use Print per Unit) • Staple Position*1: None, 1 Staple Quick File • (Disabled) • (Enabled) *1 When a finisher is installed. *2 This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a width of 1 dot. *3 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function may not take effect with some print methods.) *4 Only effective when printing PDF, JPEG, and TIFF files. 7-23 Contents