Sharp NP-PH3501QL User Manual - NEC - Page 118
Geometric Correction], Keystone
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
[GEOMETRIC CORRECTION] 5. Using On-Screen Menu MODE Set pattern for correcting distortion. If [OFF] is selected, the [GEOMETRIC CORRECTION] becomes ineffective. If you need to change the [MENU ANGLE], make sure to change it before performing the [GEOMETRIC CORRECTION]. If [MENU ANGLE] is changed after performing the [GEOMETRIC CORRECTION], corrected values will be reset to the default values. KEYSTONE Correct distortion in horizontal and vertical directions. HORIZONTAL Adjustments when projecting from a diagonal direction to the screen. VERTICAL Adjustments when projecting from the top or bottom direction to the screen. TILT Adjusts the distortion when performing trapezoidal correction with the screen moved in the vertical direction using the lens shift. THROW RATIO Adjusts according to the projection ratio of the optional lens used. Model name of lens unit L2K-10F1 L4K-11ZM L4K-15ZM L4K-20ZM L2K-30ZM L2K-43ZM1 L2K-55ZM1 Adjustment range 9 12-17 15-21 20-33 27-39 39-55 50-78 NOTE: • When power is supplied to the device, the adjustment value of the [KEYSTONE] used previously is retained even if the gradient of the device is changed. • As electrical correction is carried out by [KEYSTONE], the brightness may be reduced or the screen quality may deteriorate sometimes. 101
![](/manual_guide/products/sharp-npph3501ql-user-manual-nec-1f2fc0d/118.png)