Sharp NP-PH3501QL User Manual - NEC - Page 157

HDMI cable not supplied, Use a certified High Speed HDMI

Get Sharp NP-PH3501QL PDF manuals and user guides View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 157 highlights

6. Connecting to Other Equipment ① HDMI cable (not supplied) • Use a certified High Speed HDMI® Cable or High Speed HDMI® Cable with Ethernet. • When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector's video level can be made settings in accordance with the Blu-ray player's video level. In the menu select [ADJUST] → [VIDEO] → [VIDEO LEVEL] and make necessary settings. ② DisplayPort cable (not supplied) • Use a certified DisplayPort cable. ③ BNC cable (not supplied) • Use cables that are 5C-FB or higher (5C-FB, 7C-FB, etc.) or Belden 1694A or higher. In addition, use cables with a cable length 100m or less. • The length of cables that can be used may differ, depending on the signal. ④ LAN cable (not supplied) • Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially). • The HDBaseT port of the projector supports HDMI signals (HDCP) from transmission devices, control signals from external devices (serial, LAN) and remote control signals (IR commands). • The maximum transmission distance over the LAN cable is 100 m. (the maximum distance is 70 m for a 4K signal) • Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may be degraded as a result. • This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially. After turning on the power of the unit, select the input according to the connection terminal. Input connector HDMI1/2 IN DisplayPort 1/2 IN SDI 1/2/3/4 IN HDBaseT Button on the projector cabinet HDMI DisplayPort 3G/HD/SD-SDI HDBaseT Button on the remote control HDMI DisplayPort AUX NETWORK Note Switches between HDMI1 and HDMI2 each time it is pressed. • Switches between DisplayPort1 and DisplayPort2 each time it is pressed. • Select DisplayPort1 for dual link. • Switches between SDI1, SDI2, SDI3 and SDI4 each time it is pressed. • Select SDI1 for quad link or dual link. - 140

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
140
6. Connecting to Other Equipment
①
HDMI cable (not supplied)
•
Use a certified High Speed HDMI
®
Cable or High Speed HDMI
®
Cable with Ethernet.
•
When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector's video
level can be made settings in accordance with the Blu-ray player's video level. In the menu select [ADJUST]
→
[VIDEO]
→
[VIDEO LEVEL] and make necessary settings.
②
DisplayPort cable (not supplied)
•
Use a certified DisplayPort cable.
③
BNC cable (not supplied)
•
Use cables that are 5C-FB or higher (5C-FB, 7C-FB, etc.) or Belden 1694A or higher. In addition, use cables with
a cable length 100m or less.
•
The length of cables that can be used may differ, depending on the signal.
④
LAN cable (not supplied)
•
Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).
•
The HDBaseT port of the projector supports HDMI signals (HDCP) from transmission devices, control signals from
external devices (serial, LAN) and remote control signals (IR commands).
•
The maximum transmission distance over the LAN cable is 100 m. (the maximum distance is 70 m for a 4K signal)
•
Please do not use other transmission equipment between the projector and transmission equipment. The picture
quality may be degraded as a result.
•
This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
After turning on the power of the unit, select the input according to the connection terminal.
Input connector
Button on the projector
cabinet
Button on the remote
control
Note
HDMI1/2 IN
HDMI
HDMI
Switches between HDMI1 and HDMI2 each time
it is pressed.
DisplayPort 1/2 IN
DisplayPort
DisplayPort
• Switches between DisplayPort1 and Display-
Port2 each time it is pressed.
• Select DisplayPort1 for dual link.
SDI 1/2/3/4 IN
3G/HD/SD-SDI
AUX
• Switches between SDI1, SDI2, SDI3 and SDI4
each time it is pressed.
• Select SDI1 for quad link or dual link.
HDBaseT
HDBaseT
NETWORK
—