Sharp NP-PH3501QL User Manual - NEC - Page 76
Restrictions, Select [SUB1 INPUT] using
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4. Select [SUB1 INPUT] using the ▼/▲ buttons, and press the ENTER button. This displays the [SUB1 IMPUT] screen. 5. Select an input signal for SUB 1 using the ▼/▲ buttons and press the ENTER button. The display returns to the PICTURE BY PICTURE screen. 6. Perform the same steps as 4 and 5 to select input signals for SUB2 and SUB3. 7. Press the MENU button. The on-screen menu will disappear. • To return to a single screen, select [OFF] from the MODE select screen in Step 3. TIP: • To project two screens, select [DUAL] in the step 3, and select the input signal for SUB1 in the steps 4 and 5. • In the case of projecting two screens, you can set the orientation of screen to the portrait position or adjust the display position. (→ page 99, 100) Restrictions • The following operations are enabled only for the main display. • Visual adjustments • TEST PATTERN • The following operations are enabled for MAIN, SUB1, SUB2, and SUB3. These operations cannot be applied individually. • Momentary deletion of video (AV Mute) • Video pause (Freeze) • In the following cases, PICTURE BY PICTURE cannot be used. • When displaying 3D images • When [PICTURE SETTING] → [MODE] is set to [ZOOM] or [TILING] • When MAIN is set to SDI1 and [SDI LINK] is set to other than [SINGLE] • When MAIN is set to DisplayPort 1 and [DP LINK] is set to [DUAL] • The following operations cannot be made when [PICTURE BY PICTURE] is used. • Video magnification / demagnification using the partial D-ZOOM/ZOOM +/− buttons. • DYNAMIC CONTRAST • IMAGE OPTIONS (when MODE is set to [DUAL] and [PORTRAIT ANGLE] is set to [90°] or [270°]) • ASPECT RATIO, NOISE REDUCTION (when MODE is set to [QUAD]) 59
![](/manual_guide/products/sharp-npph3501ql-user-manual-nec-1f2fc0d/76.png)