Sharp NP-PH3501QL User Manual - NEC - Page 147
Selecting Default Source [DEFAULT INPUT SELECT], SEAMLESS SWITCHING]
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
[SOURCE OPTIONS(1)] 5. Using On-Screen Menu Selecting Default Source [DEFAULT INPUT SELECT] You can set the projector to default to any one of its inputs each time the projector is turned on. LAST Sets the projector to default to the previous or last active input each time the projector is turned on. AUTO Searches for an active source in order of HDMI1 → HDMI2 → DisplayPort1 → DisplayPort2 → HDBaseT → SDI1 → SDI2 → SDI3 → SDI4 → SLOT and displays the first found source. HDMI1 Displays the digital source from the HDMI 1 IN connector every time the projector is turned on. HDMI2 Displays the digital source from the HDMI 2 IN connector every time the projector is turned on. DisplayPort1 Displays the digital source from the DisplayPort1 IN connector every time the projector is turned on. DisplayPort2 Displays the digital source from the DisplayPort2 IN connector every time the projector is turned on. HDBaseT Project the HDBaseT signal. SDI1 Displays the digital source from the SDI1 IN terminal every time the projector is turned on. SDI2 Displays the digital source from the SDI2 IN terminal every time the projector is turned on. SDI3 Displays the digital source from the SDI3 IN terminal every time the projector is turned on. SDI4 Displays the digital source from the SDI4 IN terminal every time the projector is turned on. SLOT Displays the picture via the optional board (sold separately) inserted into the SLOT. [SEAMLESS SWITCHING] When the input connector is switched, the image displayed before switching is held to switch to the new image without a break due to absence of a signal. NOTE: • This function will not perform properly when the input signal is selected to a value other than 60/30 Hz for vertical frequency. Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE]. NOTE: • To change the image displayed as the logo, see page 165. 130
![](/manual_guide/products/sharp-npph3501ql-user-manual-nec-1f2fc0d/147.png)