Sharp NP-PH3501QL User Manual - NEC - Page 85
Black Level Adjustment, Select one option among nine by, Select [DISPLAY], EDGE BLENDING]
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
2. Select one option among nine by ▲ or ▼. 4. Multi-Screen Projection Black Level Adjustment This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING). Adjust the brightness level if you feel the difference is too large. NOTE: Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on. The black level of the lower left projector is adjusted as shown in the figure. BORDER(TOP) TOP CENTER RIGHT BORDER(RIGHT) 1. Select [DISPLAY] → [EDGE BLENDING] → [BLACK LEVEL] and press the ENTER button. The screen will switch to the black level adjustment screen. 68
![](/manual_guide/products/sharp-npph3501ql-user-manual-nec-1f2fc0d/85.png)
68
4. Multi-Screen Projection
2. Select one option among nine by
▲
or
▼
.
Black Level Adjustment
This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING).
Adjust the brightness level if you feel the difference is too large.
NOTE:
Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on.
The black level of the lower left projector is adjusted as shown in the figure.
CENTER
TOP
RIGHT
BORDER(TOP)
BORDER(RIGHT)
1. Select [DISPLAY]
→
[EDGE BLENDING]
→
[BLACK LEVEL] and press the ENTER button.
The screen will switch to the black level adjustment screen.