Sharp NP-PH3501QL User Manual - NEC - Page 144
Network Service, Service
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
NETWORK SERVICE 5. Using On-Screen Menu If [PASSCODE] has been set, you cannot display the [NETWORK SERVICE] screen without entering PASSCODE. SERVICE HTTP SERVER PJLink Configure the settings for connecting to the HTTP server. - ON Connect directly to the HTTP server without displaying the login screen. OFF It is not possible to connect to the HTTP server. AUTH Display the login screen when connecting to the HTTP server. Enter the USER NAME and PASSWORD that have been set at [ACCOUNT]. Configure the settings for using PJLink. To use this function, connect the LAN cable to the HDBaseT port. PASSWORD Set the password. Up to 32 alphanumeric characters CLASS To use functions with PJLink Class 2 specifications, set [CLASS 2]. DESTINATION When the CLASS is set to "CLASS 2", input the IP address of the destination. NOTE: • Do not forget your password. However, if you forget your password, consult with your distributor. • What is PJLink? PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard protocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The projector supports all the commands of PJLink Class 1. • Setting of PJLink will not be affected even when [RESET] is done from the menu. 127
![](/manual_guide/products/sharp-npph3501ql-user-manual-nec-1f2fc0d/144.png)